Safety Information - McConnel ROBOCUT Operator's & Parts Manual

SAFETY INFORMATION

This machine has the potential to be extremely dangerous - in the wrong hands it can kill or
maim; It is therefore imperative that both owner and operator of the machine reads and
understands the following section to ensure they are fully aware of the dangers that do, or may
exist, and their responsibilities surrounding the use and operation of the machine.
The operator of this machine is responsible not only for their own safety but equally for the
safety of others who may come into the close proximity of the machine, as the owner you are
responsible for both.
When the machine is not in use it should be parked on a firm level site with the cutting head
resting on the ground and the starting key removed.
In the event of any fault being detected with the machine's operation it must be stopped
immediately and not used again until the fault has been corrected by a qualified technician.

Before starting the machine the operator must read and understand all aspects of use and
maintenance of the machine as stated in this manual.

The machine must only be used by a responsible adult who is familiar with all aspects
relating to safe operation.

The machine must not be operated by children or non-authorised persons.

Operators must know the meaning of all operation and safety decals on both the machine
and the remote control unit.

Operators must know the procedure for switching the machine off normally and by using the
Emergency Stop.

Do not attempt to use the machine if the Emergency Stop switch is damaged or
malfunctioning.

Never use the machine with safety guarding removed or defective.
3