Fpb Playback Start (With Specifying The Playback Phrase, During Phrase Play Busy Out - Roland AR-3000SD Command Reference Manual

FPB Playback Start (with Specifying the Playback Phrase, During Phrase Play Busy Out On)
Function: Playback Start (with Specifying the Playback Phrase, During Phrase Play Busy Out on)
Syntax:
stxFPB:a,a, ..... ,a;
Syntax:
FPB:a,a, ..... ,a
a: Phrase number
Note: The phrases specified by this command will be played back consecutively. When multiple
phrases are played back in sequence, Busy Out signals are also output during intervals
between phrases.
Note: A maximum of 100 phrases can be specified in one line.
Be sure that the phrase numbers are registered (i.e., for which data exists).
* If Dual Mono Mode is ON
Since phrases will be played back from the L or the R output depending on whether they
are odd or even numbered phrases, phrases specified by the PA command will
automatically be assigned to the playback memory; odd-numbered phrases will be played
back from the L output, and even-numbered phrases will be played back from the R
output. It is not possible to playback the L and R channels independently. Compatible
with mono phrases. Not compatible with stereo phrases. For more details, refer to the
AR-3000SD Owner's Manual.
Example)
FPB:A0001,A0003,A0007,A0006,A0010
When Dual Mono Mode is on and the above phrases are specified with this command, the
phrases are played back in sequence. Phrases A0001, A0003 and A0007 are played
through the left channel and phrases A0006 and A0010 are played through the right
channel.
(RS-232C, Command format: Type 2)
(Telnet, Command format: Type 2)
AR-3000SD (Ver.1.00) Command Reference - 35