Roland AR-3000SD Command Reference Manual page 15

* If unable to log in, check the following.
- In Windows, select [Start]-[Run], then enter the following text in the text box and execute.
ping 192.168.10.2
If OK is returned from the AR-3000SD, check the application settings.
If the AR-3000SD does not return an OK, check the following.
- Has the power to the AR-3000SD been cut off?
- Has the power to the hub been cut?
- Poorly connected UTP cables
- Is the wrong type of UTP cable (straight, crossover) being used?
- Incorrect subnet mask setting
- Multiple IP address settings
- Incorrect gateway address
If the above steps do not result in a good connection, turn the AR-3000SD's power off, then on
again.
AR-3000SD (Ver.1.00) Command Reference - 15