Advertisement
THE CHASSIS
If you are modding a complete Quaverato that is already in service, you will have to open it up first.
If you are working on the Quaverato kit, your pedal is still in pieces; skip to 2.
1. Use your #2 Philips screwdriver to remove the two screws in either side of the pedal (1). Use
your pliers to remove the two plastic nuts from the 1/4" jacks (2). The bottom half of the chassis
is now loose and you should be able to slide the two halves of the chassis apart (3,4).
1
3
2
4
13
Advertisement
