Fcc Compliance Statement - DCS Bartok User Manual

Upsampling network dac
Table of Contents

Advertisement

dCS Bart
DAC User Manual
ók

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
You can determine whether this equipment is causing interference by turning it off. If the interference
stops, it was probably caused by the equipment or a peripheral device.
If your equipment does cause interference to radio or television reception, try to correct the
interference by one or more of the following measures: 
• Turn the television or radio antenna until the interference stops.
• Move the equipment to one side or the other of the television or radio.
• Move the equipment farther way from the television or radio.
• Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is,
make certain the equipment and the television or radio are on circuits controlled by different circuit
breakers or fuses.)
(USA only) If necessary consult dCS Americas or an experienced radio / television technician for
additional suggestions.
Changes or modifications not expressly approved by dCS Americas Inc. could void the manufacturer's
warranty.
This product has demonstrated electromagnetic interference compliance under conditions that
included the use of compliant peripheral devices and shielded cables between system components.
order to maintain compliance with FCC regulations, shielded cables (including Ethernet network
cables) must be used with this equipment. Operation with non-approved equipment or unshielded
cables is likely to result in interference to radio and TV reception.
Responsible party (contact for FCC matters only):
dCS Americas Inc.
Attn: FCC liaison
310A River Road
Waltham, MA 02453
Bartok DAC Manual v1_0x
Page 8
Software Issue 1.0x
February 2019
In
English version

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents