Hearing Instruments - oticon ConnectLine Streamer Pro Getting Started

Power on
Press the on/off button for
approx. 2 seconds until all front
lights are on, and the on/off
indicator on the top is green.
Power off
Press and hold the on/off
button for approx. 2 seconds
until the green on/off indicator
is turned off.
Mobile phone
Answer a call
When your mobile phone rings, you
will hear an incoming call alert in your
hearing instruments, and the phone
button on the Streamer and the
status indicator will blink green.
Press the phone button briefly
to answer the call.
Remote control of the

hearing instruments

The Streamer functions as a
remote control for your hearing
instruments when not used for
streaming.
Volume up/down
Press briefly up or down
Change program in the
hearing instruments
Press & hold up or down
More information: page 28 in the Instruction for use
Phone solution
Note: requires additional equipment.
Makes it possible to use the
Streamer with a traditional
analogue landline phone.
Press the phone button briefly
to take a call.
More information:
www.oticon.com/phone
More information: page 20 in the Instructions for use
Microphone
Reject call
An incoming call can be
rejected by
pressing the volume
down button.
Music
You can listen to music via the mini jack cable
at the bottom of the Streamer or wireless via
Bluetooth.
Music is chosen by a
press on the AUX selector.
More information: page 48 in the Instructions for use
TV solution
Note: requires additional equipment.
Makes it possible to transmit
the sound from a TV to your
hearing instruments through
the Streamer.
Press the TV button briefly
to activate the TV.
More information:
www.oticon.com/tv
Pairing the Streamer
Before the Streamer can be used with other
devices – such as mobile phones - the two
devices have to be paired.
Put the Streamer in pairing mode.
Press and hold the on/off button for approx.
5 seconds, until the on/off indicator blinks
blue.
The on/off indicator will switch to steady
blue to indicate successful pairing.
Both the Streamer and the second device
need to be in pairing mode. The pin code for
the Streamer (if requested) is 0000 (four
zeros).
briefly
brief
More information: page 30 in the Instructions for use
Make a call
To make a call you
only need to operate
the mobile phone. The
call is automatically
connected to your
Streamer.
More information: page 35 in the Instructions for use
T-coil
The Streamer has a built-in
tele loop receiver (T-coil).
To receive sound from the
tele loop receiver press
and hold the AUX selector
for approx. 2 seconds.
More information: page 56 in the Instructions for use
ConnectLine microphone
Note: requires additional equipment.
Makes is possible to transmit sound
from a chosen speaker to your
hearing instruments through the
Streamer.
Press the microphone button
briefly to activate the microphone.
More information:
www.oticon.com/mic