Putting On Your Hearing Instruments - oticon BTE Instructions For Use Manual

Standby
A long push on the button (min. 3 seconds) will set
the instrument in standby mode. To reactivate the
instrument, push the button again.
Use the standby function if you need to silence the
instrument while you have the instrument on.
12

Putting on your hearing instruments

• Hold the earmould as
shown.
• Gently pull down your
earlobe and press the
earmould in the direction
of the ear canal.
• Place the tip of the
earmould in your ear canal,
twisting slightly, making
sure that the top part of
the earmould (A) is pushed
behind and under the fold
(B) of your ear.
• With the earmould
positioned correctly in
your ear, place the hearing
instrument behind your ear
by lifting its lower part and
sliding it over the top of
your ear.
B
A
13