Professional Installation; Safety Precautions; Radio Frequency Safety - Redline RDL-3000 Series Product Manual

RDL-3000 FAMILY

3.3 Professional Installation

Devices containing the Redline RDL-3000-RMF require professional installation.
The RDL-3000-RMF must only be installed by trained professional technicians
authorized by Redline or its agents.
It is the responsibility of the installer to understand the product operation by attending
training as required, reading and understanding the product documentation, and
ensuring that all building, safety and regulatory codes are met and the installation is
complete and secure.

3.4 Safety Precautions

Installation and service must be done by personnel having technical training and
experience necessary to be aware of hazards during installation and/or service of RF
equipment. The installation and/or service must be done using procedures designed to
minimize any danger to technical personnel or any other person.

3.5 Radio Frequency Safety

The installer of this radio equipment must ensure that the antenna is located or pointed
such that it does not emit RF fields in excess of the general population limits as defined
by FCC CFR 47, Part 2.1091 and
exposure evaluation for fixed devices & Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health Canada's website:
http://www.gpo.gov/fdsys/pkg/CFR-2009-title47-vol1/pdf/CFR-2009-title47-vol1-sec2-
1091.pdf
http://transition.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65/oet
65c.pdf
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php
Refer to the regulatory statements included in this document.
70-00184-02-00
RDL-3000-RMF PRODUCT MANUAL
Proprietary Redline Communications © 2013
OET Bulletin 65,
Radio frequency radiation
Page 8 of 12 April 24, 2013