RDL-3000 FAMILY
4.2 Antenna Use and Transmit Power
The RDL-3000-RMF module supports operation with 2x2 MIMO antenna systems with
two transmit chains and two receive chains. The RDL-3000-RMF module must be used
only with certified antennas and using the channel size and output power level specified
by the FCC regulations.
4.3 Certified Antennas
This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change. Antennas having a gain higher than 13 dBi are strictly prohibited.
Supplier
Part #
AFS-VH-
Redline
60060-01
AFS-SB-
Redline
60055-01
70-00184-02-00
RDL-3000-RMF PRODUCT MANUAL
Table 1: Transmit Power
Channel #
14-34
40-51
35, 39
Table 2: Approved Antennas
Frequency
Gain
Range (MHz)
13 dBi
470-698
11 dBi
470-698
Proprietary Redline Communications © 2013
Tx Power (dBm)
+18
+16
Application
Size
122 cm
Sector
(48 in)
122 cm
Log-P
Directional
(48 in)
Page
10
of 12
Beamwidth /
Polarity
60 deg
vpol & hpol
55 deg
vpol & hpol
April 24, 2013