Conditions Of Use; General Conditions; Country Of Use - Redline RDL-3000 Series Product Manual

RDL-3000 FAMILY
2

Conditions of Use

2.1 General Conditions

The RDL-3000-RMF is not provided for sale to the general public. The RDL-3000-RMF
contains a proprietary radio interface and can not be directly connected to any standard
telecommunications or computer devices.
This manual is provided as supplement to technical and operational documentation and
training provided by Redline and its agents. Any operation or use of the RDL-3000-RMF
in any manner not expressly specified within this manual or approved in writing by
Redline (or its agents) is expressly forbidden and voids the user's right to operate the
module. This includes, but is not limited to, any modification of the module hardware or
software, installation of the module in a non approved enclosure, and use with non
approved antennas.

2.2 Country of Use

Refer to the regulatory notices in this document before installing or operating the
module.
When installed on this module, the software key region code restricts device operation to
the FCC 470 - 608 and 614 - 698 MHz band on TV channels 14 - 35 and 39 - 51. The
RDL-3000-RMF is certified with limited modular approval for use as an 'intentional
radiator' in the United States as device FCC ID: QC8-RDL3000RMF.
Region
Code
Region 12
US
470-698
Operation of the final product requires a software 'key' that is available exclusively from
Redline or its authorized agents.
The software key is unique to each module and must be installed and activated before
the radio will operate.
The key contains sufficient security features that the professional installer and operator
can not decode, modify, substitute, or otherwise circumvent the operational restrictions
imposed by the 'key'.
The software 'key' limits the transmit power, operating frequency range, and channel
bandwidth per the regulator domain governing the location where the radio will be
deployed. The operator does not have the option to select the country or regulatory
region of operation.
The software 'key' limits the mode of operation as a master or client. The client mode is
'passive listener' and while in this mode the module can not initiate any transmission
without first receiving and decoding a valid authorization message from the master. A
module with a key for client operation can not be changed by the installer to enable
master mode operation. A module with a key for master operation can operate in master
or client (passive) mode.
70-00184-02-00
RDL-3000-RMF PRODUCT MANUAL
Regional Identification Codes
Band Chan.
(MHz) (MHz)
470 to 698 6
6
Notch
Proprietary Redline Communications © 2013
Freq. (MHz)
WSDB
473 to 599 Yes
623 to 695
602 to 620
Page
Max. Tx Power (dBm)
Int. HAZ Ext.
Ant. Ant.
N/A 18 18
5 of 12 April 24, 2013