3G/LTE
1. Select 3G/LTE, press Continue to go on to next step.
2. Select the 3G/LTE mode, and enter the APN, username, password from your ISP; and check with
your ISP with the authentication method setting for each SIM (SIM1 and SIM2).
Given that BiPAC 7820NZ supports dual -SIM mobile connectivity, please determine which
Note:
SIM you are gonna use or both (3G/LTE failover), and set the exact required connecting information
for each SIM (SIM1 and SIM2).
3. Wait while the device is configured.
4. WAN port configuration is success.
Click Done, web configuration will be loaded, you will enter the web configuration page.
35