Basic Operation - DAD PX Series User Manual

2. Basic operation

2.1 Switching on
It is opportune to turn channel 1 & 2 volume controls all the way down (-80dB) before switching
the amplifier on. After having inserted the plug into the power outlet, the devices goes in the
stand-by mode, and is ready to work. Press the power button and hold it for 2 seconds:
the amplifier automatically turns on while the "Check" LED switches off and the "Active" LED
lights up in blue.
Notice:
When you insert the equipment plug into a power outlet, the amplifier is already
powered and lies in the stand-by mode ("Check LED lights up). If you have not the intention
to use it in a short while, please disconnect the line cord from the power source.
2.2 Switching off
Please adjust the CH1/CH2 volume control all the way down (-80), before switching off the
equipment.
Press the power button and hold it for 2 seconds: the amplifier automatically turns off while the
"Check" LED lights up and the "Active" LED switches off.
13