Gemtek WX-5525G User Manual page 31

WX-5525R Dual Band AP Router
Cause:
! The unit is not powered on.
! There is not a network connection.
! The computer you are using does not have a compatible IP Address.
Resolution:
! Make sure your AP is powered on.
! Make sure that your computer has a compatible IP Address. Be sure that the IP Address
used on your computer is set to the same subnet as the AP. For example, if the AP is
set to 192.168.5.2, change the IP address of your computer to 192.168.5.15 or another
unique IP Address that corresponds to the 192.168.5.X subnet.
Use the Reset button located on the rear of the AP Router to revert to the default
settings.
I can't connect to other computers on my LAN.
Cause:
! The IP Addresses of the computers are not set correctly.
! Network cables are not connected properly.
! Windows network settings are not set correctly.
Resolution:
! Make sure that each computer has a unique IP Address. If using DHCP through the AP
Router, makes sure that each computer is enable DHCP function and restart the
computer.
! Make sure that the Link LED is on. If it is not, try a different network cable.
! Check each computer for correct network settings.
Wireless Troubleshooting
I can't access the Wireless AP Router from a wireless network card
Cause:
! Out of range.
! IP Address is not set correctly.
Wireless Broadband Anywhere
30