Table of Contents
Advertisement
WX-5525R Dual Band AP Router
Firmware upgrade:
User may download the latest firmware from your vendor's website and store it in local
drive.
Find the firmware from local drive and press the Upgrade button.
Multicast Pass-Through: The default setting is Disable.
IP Multicasting occurs when a single data transmission is sent to multiple recipients at the same
time. Using the Multicast Pass-Through feature, the Router allows IP multicast packets to be
forwarded to the appropriate computers. Keep the default setting, Enable, to support the feature, or
select Disable to disable it.
:
The Router's MAC address is a 12-digit code assigned to a unique piece of
MAC Cloning
hardware for identification. Some ISPs require that you register the MAC address of your network
card/adapter, which was connected to your cable or DSL modem during installation. If your ISP
requires MAC address registration, find your adapter's MAC address by following the instructions
for your PC's operating system.
For Windows 98 and Millennium:
1.
Click the Start button, and select Run.
2.
Type winipcfg in the field provided, and press the OK key.
3.
Select the Ethernet adapter you are using.
Wireless Broadband Anywhere
14
Advertisement
Table of Contents
