Gemtek WX-5525G User Manual page 10

WX-5525R Dual Band AP Router
Max Idle Time field. Otherwise, enter the number of minutes you want to have
elapsed before your Internet connection terminates.
•
Keep Alive Option
This option keeps you connected to the Internet indefinitely, even when your
connection sits idle. To use this option, click the radio button next to Keep Alive.
The default Redial Period is 30 seconds (in other words, the Router will check the
Internet connection every 30 seconds).
IP Address and Subnet Mask: This is the Router's IP Address and Subnet Mask as seen
on the internal LAN. The default value is 192.168.1.1 for IP Address and 255.255.255.0
for Subnet Mask.
Wireless:
2.4GHz Settings
Mode:
The default setting is Mixed.
If you have Wireless-G and 802.11b devices in your network, then keep the default setting, Mixed. If
you have only Wireless-G devices, select G-Only. If you want to disable wireless networking, select
Disable.
Channel: The default setting is 6.
Select the appropriate channel from the list provided to correspond with your network settings,
between 1 and 11 (in North America). All devices in your wireless network must use the same
channel in order to function correctly.
Channel: Select the appropriate channel from the list provided to correspond with your
network settings. You shall assign a different channel for each AP to avoid signal
interference.
Wireless Broadband Anywhere
9