Table of Contents
Advertisement
WX-5525R Dual Band AP Router
•
Destination IP Address - The Destination IP Address is the address of the
remote network or host to which you want to assign a static route.
•
Subnet Mask - The Subnet Mask determines which portion of an IP
address is the network portion, and which portion is the host portion.
•
Default Gateway - This is the IP address of the gateway device that allows
for contact between the Router and the remote network or host.
Depending on where the Destination IP Address is located, select LAN & Wireless or
Internet (WAN) from the Interface drop-down menu.
6. To cancel your changes, click the Cancel button. To save your changes, click the
Apply button.
To delete a static route entry:
1. From the Static Routing drop-down list, select the entry number of the static
route.
2. Click the Delete This Entry button.
3. To cancel a deletion, click the Cancel button. To save a deletion, click the
Apply button.
Show Routing Table
Click the Show Routing Table button to view all of the valid route entries in use. The
Destination LAN IP address, Subnet Mask, Gateway, and Interface will be displayed for
each entry. Click the Refresh button to refresh the data displayed.
•
•
•
•
DDNS
Wireless Broadband Anywhere
Destination LAN IP - The Destination LAN IP is the address of the
remote network or host to which you want to assign a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP
address is the network portion, and which portion is the host
portion.
Gateway - This is the IP address of the gateway device that allows for
contact between the Router and the remote network or host.
Interface - This interface tells you whether your network is on the
internal LAN, the WAN (Internet), or Loopback (a dummy network
in which one PC acts like a network - necessary for certain software
programs).
27
Advertisement
Table of Contents
