Table of Contents
Advertisement
WX-5525R Dual Band AP Router
box, depending on the kind of access you want to control. Select Internet
Access to control your network PCs' access to the Internet. Select Inbound
Traffic to control Internet PCs' access to your local area network.
Note: The screen's settings will vary depending on which Policy Type you
select.
4.
Select Deny or Allow, depending on how you want to control access for specific PCs.
5.
Click the Edit List button next to PCs or Internet PCs.
a.
On the List of PCs or List of Internet PCs screen, specify PCs by IP address or MAC
address. Enter the appropriate IP addresses into the IP fields. If you have a range of IP
addresses to filter, complete the appropriate IP Range fields. Enter the appropriate MAC
addresses into the MAC fields.
b.
Click the Apply button to save your changes. Click the Cancel button to cancel your
unsaved changes. Click the Close button to return to the Internet Filter screen.
6.
Set the days when access will be filtered. Keep the default setting, Everyday, or select the
appropriate days of the week.
7.
Set the time when access will be filtered. Keep the default setting, 24 Hours, or check the box
next to From and use the drop-down boxes to designate a specific time period.
Note: Access for the listed PCs will be controlled during the selected days
and times. Any blocked services or websites will be blocked at all times.
8.
In the Blocking Services drop-down boxes, select the services you want to block (the default
setting is None). In the Blocking Services fields, the range of ports for this service will appear. If
you want to change the range of ports, enter the new numbers in the Blocking Services fields, or
edit the service's settings (see below).
To add a service or edit a service's settings, follow these instructions:
a.
Click the Add Service button.
b.
To create a new service, enter the name of the service in the Service Name field. To
edit a service's settings, select the service from the box on the right of the screen.
c.
From the Protocol drop-down menu, select the protocol type for this service: ICMP,
UDP, TCP, or UDP & TCP.
d.
In the Port Range fields, enter the range of ports for this service.
e.
To add a service, click the Add button. To edit the settings for a service, click the
Modify button.
f.
To delete a service, select the service from the box on the right of the screen. Click
Wireless Broadband Anywhere
23
Advertisement
Table of Contents
