Honeywell 13270-01LB Data, Installation And Commissioning Manual page 7

Fire Panels
Dedicated mains
cable entry points
Transformer
cables
to electronic
assembly
Earth connection
to the electronic
assembly
Fixing points for the
electronic assembly
Figure 10 Refitting electronic assembly
Control or Repeat
panel
Figure 11 Installing a flush shroud
Store all spare parts and loose
components including the
batteries inside the panel carton
and keep in a safe place until
required.
4188-424 issue 4_Part 1_10-09
Panel Backbox
Electronic assembly
Ribs
+ve
Red
Battery connections
-ve
Black
Aperture
Flush
shroud
4.5 mm diameter holes
12 holes
4-off earth points
To
Transformer
T1A T1B
NOTE: The metal plates are to be located
under the ribs on the front panel and fixed
in place using M3 screws.
Bottom Plate (instructions printed onto plate)
60mm deep
378mm wide
7
Panel fixing
To
Earth
E
P1
cross section of
the wall to which
the panel is to be
flush mounted
245mm high