Mitsubishi Electric JT-SB116EH-W-CA Handbook page 31

3 Slide and remove the main unit frame.
4 Remove grounding wire clamping screw.
(one special PP screw with spring washer 4 x 8, indicated by
)
5 Remove rear cover clamping screws.
(five special screws 4 x 12, indicated by
Cautions for assembly
• When fixing lead wires with cord clips, avoid the wires
becoming loose in the main unit frame.
• Take care not to omit the spring washers when clamping
the grounding wire.
6 Remove the heater box. (indicated by
7 Remove heater box clamping screw.
(one special screw 4 x 8, indicated by
Cautions for assembly
Hook the claw on the heater box in the square hole of heater
base (right). (indicated by
)
)
)
)
— 32 —