Table of Contents
Advertisement
Full size CPU Card
ü
ü
Chapter3 Award BIOS Setup
computer provides an I/O address. The more devices
attached the more address needed to organize the
memory storage areas. If all the I/O devices were
running through the same address, your devices would
come to a near halt. Also the corresponding interrupt
needs to be selected.
The choices: Disabled, Auto, 2E8/IRQ3,
3E8/IRQ4, 2F8/IRQ3, 3F8/IRQ4.
UART Mode Select
If you don't disable Onboard Serial Port 2, you will have
to select an operating mode for the second serial port:
Normal: RS-232C serial port
IrDA: IrDA-compliant serial infrared port
ASKIR: Amplitude shift keyed infrared port
SCR: Smart Card Reader
The choices: Normal, IrDA, ASKIR, SCR.
UR2 Duplex Mode
Select the value required by the IR device connected to
the IR port. Full-duplex mode permits simultaneous
two-direction transmission. Half-duplex mode permits
transmission in one direction only at a time.
The choices: Half, Full.
S B C - 8 6 0
3 - 25
Advertisement
Table of Contents
