Table of Contents
Advertisement
Full size CPU Card
ü
ü
ü
Chapter3 Award BIOS Setup
The four IDE PIO (Programmable Input/Output)
fields let you set a PIO mode (0-1) for each of the two
IDE devices and the two storage devices that the
onboard IDE interface supports. Modes 0 through 4
provide successively increased performance. In Auto
mode, the system automatically chooses the best mode
for each device.
The choices: Auto, Mode 0, Mode 1, Mode 2, Mode
3, Mode 4.
IDE Primary or Secondary Master/Slave UDMA
Ultra DMA100 implementation is possible only if your
IDE hard drive supports it and the operating
environment includes a DMA driver. If both your hard
drive and IDE cable support Ultra DMA 100 select
Auto to enable BIOS support.
The choices: Auto, Disabled.
USB/ USB 2.0 Controller
USB controller: This function is used to enable/disable
onboard USB controller
USB 2.0 controller: This function is used to
enable/disable high speed USB 2.0 device
The choices: Disabled, Enabled.
USB Keyboard/Mouse Support
S B C - 8 6 0
3 - 22
Advertisement
Table of Contents
