Regency ULTIMATE U38E Owners & Installation Manual page 21

6 Place Front Right Log E on the two pins as shown.
7. Place the notch in Center Log F over
Log E and across the cut-out on Log A.
Notch
8. Position notch in Front Right Log G on Log F and push the
bottom right edge against the bracket on the burner tray.
A
Notch
918-039b
E
F
A
E
Cutout
E
E
Side
View
The bottom right edge of Log G must sit
snugly against the bracket
9. Take the Embaglow, (steel wool like material) lightly separate
it and set a small amount over the visible burner ports in
front and between the front left log and the log under the
"Y" log, indicated in the picture.
IMPORTANT: DO NOT compress this material down on the
burner ports.
Embaglow
10. Next, take the white Platinum Ember material (provided)
and gently separate the layers until you have a fi ne layer
to place onto the Embaglow (steel wool type media).
Platinum Embers
Regency U38E-11 ULTIMATE Freestanding Gas Stove
®
U38 / U39 installation
G
Bracket
04.05.18
| 21