This chapter covers the minimum steps you must complete to install and use
the Low Power Wireless LAN Card.
STEP 1: Register the Card
Register your Socket Low Power Wireless LAN Card online at
www.socketcom.com/product/prodreg.htm
You can also use the product registration form in your product package.
STEP 2: Network Information Form
Consult with your office network administrator/MIS technician for the
information below. For a text-only form you can email, go to the Docs
folder on the installation CD or visit:
ftp://ftp.socketcom.com/wlan/WLAN_NetworkForm.txt
1. What is your wireless LAN's ESSID
_________________________________________________________
2. Please identify the encryption method and any necessary encryption data:
Open System
40-bit __________; __________
128-bit __________; __________; __________; __________;
__________; __________
(Continued on next page)
6 | CHAPTER 2: BASIC SETUP
Chapter 2 Basic Setup
(Extended Service Set Identifier)
?