Setup For The Somo 650; Step 1: Prepare Network Information - Socket Rugged CF 10/100 Card User Manual

This chapter explains how to set up the Rugged CF 10/100 Card
for any version of the Socket 650 handheld computer.
Setup Summary

STEP 1: Prepare network information.

STEP 2: Enter network settings.
STEP 3: Insert card and connect to LAN.
STEP 1: Prepare Network Information
Contact your network administrator for the information below.
For a text-only form that you can email to your network administrator, go to
the Docs folder on the installation CD.
Does the network support DHCP (Dynamic Host Configuration Protocol)?
YES. If Yes, then STOP. You do NOT need any IP addresses.
NO. If No, then please specify any applicable IP addresses (you may only need
some listed below):
Mobile Computer IP address: _____ . _____ . _____ . _____
Subnet Mask: _____ . _____ . _____ . _____
Default Gateway: _____ . _____ . _____ . _____
Primary DNS: _____ . _____ . _____ . _____
Secondary DNS: _____ . _____ . _____ . _____
Primary WINS*: _____ . _____ . _____ . _____
Secondary WINS: _____ . _____ . _____ . _____
*Remote ActiveSync only: If your server does NOT have WINS services enabled, use the
IP address of your host PC instead of a Primary WINS address. You can only
synchronize over Ethernet using Windows Mobile 2003/2003SE and a version of
ActiveSync previous to 4.0.
6

2 | Setup for the SoMo 650