Ping Page - Socket Low Power Wireless LAN Card User Manual

Ping Page

Use the Ping page to view the signal strength, data rate transmission, test
statistics and to perform data transmission test. This test sends an ICMP
ping packet across the network to a selected address to test data
transmissions between wireless devices or between a wireless device and the
associated access point. .
Use the IP field to enter the IP address of the target device
(ie: 122.78.3.141).
Select the size of packets sent from the Size pull-down menu.
Tap Start Test to begin the test. Each ping displays the round trip time it
took the ICMP ping to complete. The minimum, maximum and average
values are displayed as results. A real-time graph indicates the signal
strength and data rate transmission.
Tapping Stop Test, another page tab or OK will stop the ping test.
CHAPTER 3: ADVANCED FEATURES | 17