Power Settings Page
The Power page varies depending on operating mode.
Infrastructure mode:
Radio Transmission Power — Select Automatic to use the same power level
as the access point. Other options will be available in future releases.
Automatic Power Saving Mode — Recommended.
If desired, uncheck this box and use the sliding scale to manually set the
power savings.
Ad-Hoc or Enhanced Ad-Hoc mode:
Radio Transmission Power — Select the proper power level. More power is
needed for greater transmit distances and/or dealing with high interference.
Automatic Power Saving Mode — Recommended.
If desired, uncheck this box and use the sliding scale to manually set the
power savings.
Important! When done entering the settings on each page, tap Apply.
To exit the utilities, tap Ok.
CHAPTER 2: BASIC SETUP | 13