Happy Fabric HappyPress Operating Manual page 27

Warranty Terms
Return
Returns may only be made with the written authorisation of GSE TexPrint Solutions UK
Ltd. Please make sure that when you return the press you pack it into the original box, and
enclose your name and address inside the box. Please enclose a brief description of the
fault. Write clearly the RMA number on the shipping box, and if necessary, please contact
our service staff for a new box for a fee (if you do not have available the original box). GSE
TexPrint Solutions UK Ltd will not be liable for any damges caused in transit due to poor or
improper packing.
Return of the machines manufactured by GSE TexPrint Solutions UK Ltd for disposal
GSE TexPrint Solutions UK Ltd agrees to take back all machines manufactured by GSE
TexPrint Solutions UK Ltd which are clearly marked as manufactured by them. Machines
must be returned with all components, at the customer's expense, so they can be properly
disassembled and disposed of by GSE TexPrint Solutions UK Ltd.
WEE/ED5610UY
Packaging
Please retain the carton and packing materials to safely pack up the heat press at a later date
should it require transportation.
Prepare
Please ensure that your machine is standing firmly on your counter top. Open the transfer
press completely to carry out set up, until it stops. Place the item to be printed (which should
be flattened and smoothed) on the lower plate. Be careful that when the press is not fully
open there is a risk of burns. Always strictly observe the printing instructions of the various
materials you use.
Error Code 232
If the display of your HappyPress is displaying the number 232, your HappyPress is infor-
ming you that it can not feel any temperature. There can be two reasons for this error:
a) The cable is not sufficiently connected. Make sure your the cable is plugged in securely
and screwed tight. Even if the plug look symmetrical at first glance, it has little protrusions
on the edge. Make sure those align with the indents in the receptacle to easily screw the
plug in place.
b) When you are certain that the cable is correctly connected, the error lies within the press
or the cable. Please contact us so we can discuss the right course of action.
See pages 14-15 for further details.
27
www.happyfabric.de