After successfully connected, choose "Slicer> CuraEngine" and open the configuration menu. See
picture (6-12).
It pops up dialog as picture below (6-13):
Printer parameters are important to print quality. Customers need to run tests to find the best
parameters for their printers. Here we provide a configuration file for your reference ("Geeetech
A20M PLA high.rcp"). You can import it according to the steps as follows. The following is an
example of parameters for PLA (Picture 6-14):
SHENZHEN GETECH TECHNOLOGY CO., LTD
(Picture 6-12)
(Picture 6-13)
37