Yealink T42S Quick Reference Manual

Yealink T42S
Quick Reference Guide
Yealink T42S
Quick Reference Guide
Available features may vary. Provided feature set is based on the original order and
the system administrator's requests for each deployment. Please contact your system
administrator or Telesystem directly to discuss any additions to the system.
Programmable Top Keys: At least one line key plus up to 14
other buttons may be programmed on the keys that line the
right and left side of the dynamic screen.
Soft keys:
four state-
based keys
that line the
bottom of the
screen. Press
the More key
to see
additional
options.
Dial Pad Navigational
Buttons
2700 Oregon Road
Blue Platform
Message Waiting
Indicator (Voicemail)
Mute
Headset
Messages
Redial
Volume Speaker
• Northwood, OH 43619 | 1645 West Chester Pike
Basic Call Handling
Make a call
Lift the handset then enter the phone number, extension, or code you wish to dial.
Press Send to initiate the call or wait for it to go through.
Most deployments should be sure to dial 1 before an out of area phone number.
Answer a call
Lift the handset then begin speaking to the caller.
Alternately, the Answer soft key, Speaker button, or Headset button may be pressed
to answer an incoming call.
End a call
Hang up the handset or press the End Call soft key.
Speaker
Press the speaker button to use speaker audio mode.
Headset
Press the headset button to use headset mode audio (must have a headset
attached).
Volume
Press the volume buttons to adjust volume for your ringer when idle or
audio mode while on a live call.
Mute
Press the mute button to mute your audio while on a call. Press again to
disengage.
• West Chester, PA 19382 • 1.888.808.6111 | www.telesystem.us