DVD RECEIVER AMP HT-DS650 HT-DS660 HT-DS660T HT-DS690 SERVICE Manual DVD RECEIVER AMP SYSTEM CONTENTS 1. Alignment and Adjustments 2. Exploded Views and Parts List 3. Disasembly and Reassembly 4. Electrical Parts List 5. Block Diagrams 6. Wiring Diagram 7. Schematic Diagrams 8.
FM IN Output 28 dB(±2dB) 10 kΩ Adjust SVR1 so that “TUNED” of FLT is lighted (Figure 1-2) *Adjust FM S.S.G level to 28dB Figure1-2 FM Auto Search Level Adjustment * AM, LW, SW Band : No Adjustment point Samsung Electronics...
Page 9
2-3 SPEAKER Composite View 2-3-1 HT-DS650/ DS690 * CAUTION : The NET FRAME(or FRONT PANEL ASS’Y) uses bonding to connect to CABINET ASS’Y. The extreme care not to damage the SPEAKER during disassembly. Samsung Electronics...
Page 10
2-3-2 HT-DS660 * CAUTION : The NET FRAME(or FRONT PANEL ASS’Y) uses bonding to connect to CABINET ASS’Y. The extreme care not to damage the SPEAKER during disassembly. Samsung Electronics...
1. Turn up the SET and insert the thin pole in the half-moon type Hall of CABINET BOTTOM. 2. Press the TRAY OPEN manual lever 15 times with thin poles toward the OPEN direction as indicated in CABINET BOTTOM to lower the CD DECK. Samsung Electronics...
Page 13
2. Unfasten 4 SCREW 3 and lift the back of MECHA to separate 2 connectors. 3. Slightly lift the front, right and left of TRAY to rotate the door, and lift the back of DVD MECHA to separate while the door opens. 4. Separate connector 1. Samsung Electronics...
Page 14
3-5. Separate FRONT 1. Separate the connector connected to the FRONT. 2. Unfasten 2 SCREW 4 and 4 SCREW 5. 3. Turn over the hook at 2 places of sides and 2 places of bottom and separate the FRONT. Samsung Electronics...