Display View - I2M Chrome Lite User Manual

Display View

(Display View sub-menu tree)
Thanks to this menu it is possible to set the items displayed in the startup screen. Chrome has two different
configurations: "BOX" and "RACE". For both configurations it is possible to choose several parameters that
the system will store in memory. If the system is in "BOX" mode, "RACE" mode will be automatically set as
soon as the finish line is crossed, then "BOX" configuration will be on again at the end of the session. If the
"Change with VEL1" is set, the transition will occur even when 60km/h are exceeded on the rear wheel.
Choose the preferred mode in the first line and all the possible options will be displayed in the subsequent
lines. In the upper right part of the startup screen (the position occupied by the speedometer) it is possible
to place the rear wheel speed, the GPS measured speed or the coolant temperature. The speed can be
visualized in Km/h scale or in mph scale.
The "RPM" option is used to set the full-scale range and the minimum value of the tachometer, these two
values are independently configurable to adapt Chrome to different motorcycles or simply to personalize
the displayed information.
The background color option allows to choose from three different background colors: standard, red and
green (for the Lite). The last four options identify the four positions on the Chrome startup screen: by
selecting one of them, the corresponding position on the screen will be highlighted, this way it is possible
to choose what has to be displayed in each position. Moreover, each position can be left empty, in order to
simplify the screen. The first position is the only one that can show the water temperature, that will be
displayed together with the corresponding symbol.
21
www.i2m.it/en