3. Appearance Instruction
⑴ Antenna
⑵ USB: Micro USB, software upgrade interface
⑶ ON/OFF: Power switch
⑷ HDMI in: HDMI input (HDMI-A type connector)
⑸ SDI LOOP: SDI Loop out (BNC connector)
⑹ SDI in: SDI input (BNC connector)
⑺ DC in: Support DC 7-34V voltage input, 5.5mm/2.1mm. Outside: negative, Inside: positive
⑻ OLED: 0.96-inch OLED
⑼ Five-direction switch: Five-direction adjustment button (adjust the display menu to switch and confirm in
five directions: up, down, left, right, and vertical)
⑽ Installation thread: 1/4"-20 thread. Use the package supplied articulating arm trestle to install the device to
the camera.
⑾ Product label
⑿ Battery plate: Various standard DV battery plates optional. See details in "8. Battery Plate"
⒀ Link: RSSI LED indicator
⒁ Video: Video signal indicator
⒂ Power: Power status indicator
The description of LED status indicator
Device
LED indicator
Power
SW-M450
Video
Transmitter
Link
Transmitter SW-M450
Status
Constant On
Off
Network is connected, and there is recognizable
Constant On
Flash
Constant On
Flash
The wireless network connection is abnormal
Description
Power connected and switched on
Power disconnected and switched off
video signal input
Network connection failed and there is no
recognizable video signal input
The wireless network connection is normal