Troubleshooting; Specification - SWIT SW-M450 User Manual

9. Trouble shooting
If the receiver failed to output video correctly, the possible causes are as below; please find the solution from
following chart:
The receiving
video
No display
Video quality is
poor

10. Specification

Model
Input
Output
Video format
Wireless
frequency
Radio module
Max transmission
distance
Latency
Power
consumption
Transmitting
power
Human–Machine
Interaction
Input voltage
Working
environment
Dimension(witho
ut antenna)
Net weight
(without antenna)
Possible causes
The transmitter
powered on
The antennas are not installed properly
and screwed tightly
Bad connection of video cable
Video format is not supported
Bad connection of video cable
The wireless transmission is disturbed
by environment.
The transmission distance is out of
effective range or being interfered by
obstacles.
SW-M450T Transmitter
SDI×1, HDMI×1
SDI×1
1080i（60∕59.94∕50）∕720p（60∕59.94∕50)∕1080p（60∕59.94∕50∕30∕
29.97∕25∕24∕23.98）
5.1～5.9GHz
OFDM 16QAM
450m ( Line of sight)
≤1 millisecond
≤7W
100mW
0.96-inch OLED, Five-direction adjustment button
DC⁄ Battery: 7～34V
Temperature: 0℃~+40℃
66x106.5x24.7（mm）
195.4g
receiver is not Check power connection and switch on
the transmitter and receiver
Install the antennas properly and screw
tightly of both transmitter and receiver
Check video cable connection of both
transmitter and receiver
Check the format of video source.
Specifications.)
Check video cable connection and if
possible, change to better quality cables
Wait for one minute or reboot both the
transmitter and receiver
Try the wireless transmission at a closer
distance or clean out the obstacles
/
HDMI×1, SDI×2
≤9W
/
DC⁄ Battery: 7～34V
102.8x138.5x20.8（mm）
358.4g
Solution
(See the supported video formats at
SW-M450R Receiver