Step By Step Guide - Firecell Device To Rcc Surveying - EMS FireCell FC-868-SE2 User Manual

Step By Step Guide - FireCell Device to RCC Surveying

Note: a Device to RCC Survey Form is supplied on page 23.
Step 8.
Device to RCC coverage must now be proven. Position the
Signal Surveyor in the proposed RCC location.
Step 9.
Record the background level displayed, for future reference.
Refer to the Using the Signal Surveyor section for more
information.
Step 10.
Position the Device Survey Tool against the wall or ceiling in
the positions of the proposed wireless device.
Step 11.
Record the signal level.
Step 12.
Repeat Steps 10-11 for all device positions associated with the
RCC position.
Step 13.
If there are multiple RCC positions on site, repeat steps 8 to 12
for each RCC.
©2018 EMS Ltd. All rights reserved. Page 22 of 24
Surveyor
in RCC
position
CH 1 CH 2 CH 1 CH 2
POWER/
CHARGE
RSSI/dB TX
START
RX
LOCAL - REMOTE REMOTE - LOCAL
Steps
8 to 11
Next RCC
position
CH 1 CH 2 CH 1 CH 2
POWER/
CHARGE
RSSI/dB TX
START
RX
LOCAL - REMOTE REMOTE - LOCAL
MK144 (Iss 3) 30/10/2018 AJM