Step By Step Guide - Fusion System Survey - EMS FireCell FC-868-SE2 User Manual

Step By Step Guide - Fusion System Survey

Note: a Fusion RLM Survey Form is supplied on page 15.
Step 1.
Position the Signal Surveyor in the proposed RLM location.
Step 2.
Turn on the Signal Surveyor.
Step 3.
Record the background level displayed, for future reference.
Refer to the Using the Signal Surveyor section for more
information.
Step 4.
Turn on the Device Survey Tool.
Step 5.
Position the Device Survey Tool against the wall or ceiling in
the positions of the proposed Wireless device.
Step 6.
Record the signal level.
Step 7.
Repeat Steps 5-6 for all device positions associated with the
RLM position.
©2018 EMS Ltd. All rights reserved. Page 14 of 24
Surveyor
in RLM
position
CH 1 CH 2 CH 1 CH 2
POWER/
CHARGE
RSSI/dB
TX
START
RX
LOCAL - REMOTE REMOTE - LOCAL
START
SURVEYOR
DEVICE
LOCAL - REMOTE PASS / FAIL
Setting up comms
Surveyor Vxx.xx
REMOTE - LOCAL
SIGNAL QUALITY %
BATTERY
Steps
5 to 6
MK144 (Iss 3) 30/10/2018 AJM
CH 1 CH 2
RSSI/dB
LOCAL - REMOTE