Fusion Rlm Survey Objectives; Typical Fusion Rlm System Overview; Fusion Rlm Survey Guidelines - EMS FireCell FC-868-SE2 User Manual

Fusion RLM Survey Objectives

Identify all Fusion RLM positions.
Prove all wireless device communications are above 24dB and indicate a pass.

Typical Fusion RLM System Overview

FIRE
Fire Alarm Control

Fusion RLM Survey Guidelines

Before you start surveying the premises there are a number of points to take into consideration
that will aid the survey. These are as follows:-
1. Identify where the RLM is to be installed on the loop cabling. This is the starting point of the
wireless infrastructure and where you should position your Signal Surveyor.
FIRE
Fire Alarm Control
©2018 EMS Ltd. All rights reserved.
31 Devices per RLM
POWER
FAULT
Loop Module
ISOLATOR
ACTIVE
Page 11 of 24
31 Devices per RLM
POWER
FAULT
Loop Module
ISOLATOR
ACTIVE
MK144 (Iss 3) 30/10/2018 AJM
POWER
FAULT
Loop Module
ISOLATOR
ACTIVE