Epson TM-P20 Technical Reference Manual page 67

Configuration menu
You can configure the settings as shown in the table below.
Menu
Wireless
Security SSL/TLS
Certificate List
Authentication
Certificate
Import
IPv4 Address
TCP/IP
DNS/DDNS
SNMP
Bonjour
Time Setting
Timeout
ePOS-Print
Wireless Settings (Communication Standard, Network Mode, SSID, Channel,
Encryption Type)
WPA Pre-Shared Key, Default WEP Key, WEP Key 1/2/3/4, Authentication
Algorithm
Power Save
Roaming
AP Density
Note:
Characters you can use for the User ID/Password when using WPA-Enterprise
are as follows:
- Character code: ASCII character (20H to 7EH)
- Maximum number of characters: 128
Server Certificate, Encryption Strength, Automatic Redirect HTTP to HTTPS
Self-Signed Certificate (Status, Subject)
CA-Signed Certificate 13 (Status, Subject)
CA Certificate 110 (Status, Subject)
Certificate Import (File Type, File Name, Password)
Note:
Characters you can use for the Password section are as follows:
- Character code: ASCII character (20H to 7EH)
- Maximum number of characters: 64
IP Address Settings (Acquiring the IP Address, IP Address, Subnet Mask, Default
Gateway)
Set Using Automatic Private IP Addressing (APIPA)
DNS Server Addresses (IPv4) Settings (Acquire DNS Server Address Automati-
cally, DNS Server Addresses)
Host Name and Domain Name Setting (Acquire Host Name and Domain Name
Automatically, Host Name, Domain Name, Register the Network Interface's
Address to DNS Server)
Community (Read/Write, Wellknown Community Name)
IP Trap (Trap1/2, Address, Community)
Bonjour (Disable/Enable)
Bonjour Name, Bonjour Printer Name, Location
Use Time Server
Time Server Address, Update Interval
Print (LPR, RAW (Port9100))
Version, ePOS-Print (Disable/Enable), Device ID
Chapter 3 Advanced Usage
Settings
3
67