Epson TM-P20 Technical Reference Manual page 60

Hide thumbs Also See for TM-P20:
Table of Contents

Advertisement

SimpleAP mode (SimpleAP)
In Wi-Fi model, select 2: SimpleAP to start in SimpleAP mode (the same as the factory default setting).
Select this to use Quick connection for Wi-Fi model.
For information on the Quick connection function, see
30.
Auto re-connect to iOS device (Bluetooth)
In Bluetooth model, select 2: Bluetooth and set in 1: Auto Re-Connect iOS, you can select whether to enable or
disable auto reconnection to iOS devices.
For details on the auto re-connect function, see
Bluetooth Security Settings (Bluetooth)
When the firmware version is 1.01 ESC/POS or later, you can change the Bluetooth security settings.
When the security settings are changed, the link key (pairing information) is removed.
You can change the settings for TM-P20 Utility and TM Utility for iOS/Android.
For Bluetooth models, select 2: Bluetooth, and then select 2: Security, and you can change the Bluetooth security
settings.
Security
Low
Middle
High
 When Middle is selected, the power LED flashes in the following pattern while pairing is possible.
60
"Auto Reconnect Feature" on page
Pairing Mode
Pairing is always possible
Pairing is possible for one minute
after printing the status sheet
Pairing is possible for one minute
after printing the status sheet
5,120 ms
640 ms
Approx.
"Useful Functions for Smart Devices" on page
96.
Pairing Method
Just Works
Just Works
Numeric Comparison/Passkey Entry

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents