Wireless Module Setup Mode - Epson TM-P20 Technical Reference Manual

Wireless module setup mode

You can change settings or reset the wireless communication settings. For Wi-Fi models, you can change or
reset the wireless LAN settings, and for Bluetooth models, you can change or reset the Bluetooth settings. For
USB connections, the settings are not reset.
Follow the steps below.
1
After running a self test, hold down the FEED button for at least one second, and then
select the Mode selection.
Prints the Mode selection guidance, and the
2
After briefly (less than one second) pressing the FEED button for four times, hold it
down for at least one second to select the Wireless module setup mode.
The operation guidance is printed, and the
Wi-Fi model
3
Perform one of the following operations according to the printed operation guid-
ance.
Initialize
1: Select Initialize to initialize the wireless communication settings (network parameters). The printer is reset
and restarted.
<Procedure>
After briefly (less than one second) pressing the FEED button once, hold it down until the following message is
printed.
Power LED flashes.
Power LED flashes.
Bluetooth model
Chapter 3 Advanced Usage
59
3