Character Specifications - Epson TM-P20 Technical Reference Manual

 The maximum printing speed listed above may not be achieved depending on the type of inter-
 If the data transmission speed is slower than the maximum printing speed, or depending on the
 If the data transmission speed is slow, intermittent printing may occur and white lines may be

Character Specifications

Number of characters
ANK models
Simplified Chinese models
Traditional Chinese models
South Asia models
Character structure
Common to all models
Chinese model
84
face, the data transmission speed, and the combination of control commands. Especially, the print-
ing speed may change automatically depending on the communication environment if using a
wireless interface.
battery depletion and deterioration conditions and environment temperature, the printing speed
may fluctuate, and the print result may become shaded and/or dot displacement in paper feeding
may occur.
formed when printing graphics. To avoid this, keep the print speed constant by setting it lower. The
print speed can be set with the customized value. To set the customized value, see
tings" on page 47.
Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Kanji font GB18030-2000: 28,553
Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Kanji font Big5: 13,535
Alphanumeric characters: 95
Extended graphics: 128 × 42 pages (user-defined page is not supported)
International characters: 29 sets
Font A
Font B
Font C
Font D
Font E
Kanji Font A
12 × 24
9 × 24
9 × 17
10 × 24
8 × 16
24 × 24
"Software Set-