Important Information; Safety Instructions; Before Installation, Reinstallation Or Troubleshooting; Before Start-Up - Linak HOMELINE TWINDRIVE TD2 User Manual

Important information

Important information on LINAK
headings:
Warning!
Failure to comply with these instructions may result in accidents involving
serious personal injury.
Failing to follow these instructions can result in the product being
damaged or being ruined.
Safety instruction
General
Safe use of the system is possible only when the operating instructions are read completely and
the instructions contained are strictly observed.
Failure to comply with instructions marked with the "NOTE" symbol may result in serious damage
to the system or one of its components.
Persons who do not have the necessary experience or knowledge of the product/products must not
use the product/products. Besides, persons with reduced physical or mental abilities must not use
the product/products, unless they are under surveillance or they have been thoroughly instructed in
the use of the apparatus by a person who is responsible for the safety of these persons.
Moreover, children must be under surveillance to ensure that they do not play with the product.
It is important for everyone who is to connect, install, or use the systems to have the
necessary information and access to this User Manual.
If there is visible damage on the product it must not be installed.
Before installation, reinstallation, or troubleshooting:
• Stop the TD2
• Switch off the power supply and pull out the mains plug.
• Relieve the TD2 of any loads, which may be released during the work.

Before start-up:

• Make sure that the system has been installed as instructed in this User Manual.
• Make sure that the voltage is correct before the system is connected to the mains.
(See TD2 label on page 10).
• System connection. The individual parts must be connected before connection to the mains.
products can be found under the following
®
Page 5 of 20