Safety Notes; General Safety Information - ABB Arc Guard System TVOC-2-COM Configuration Manual

Modbus
Table of Contents

Advertisement

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)
Read this first
Warning and safety
Thank you for selecting this ABB TVOC-2 Arc Guard
System™. Carefully read and make sure that you
understand all instructions before you mount, connect,
configure the Arc Guard System.
This manual is intended for configuration of the TVOC-2-
COM Modbus interface.
The manual is available on:
http://new.abb.com/low-voltage/products/arc-guard
Only authorized and appropriately trained personnel
are allowed to install and make the electrical
connection of the Arc Guard System in accordance with
existing laws and regulations.
Only authorized personnel are allowed to do service
and repair on the Arc Guard System.
Unauthorized repair will effect the warranty.
This manual is a part of the TVOC-2 Arc Guard System.
Always keep this manual available when working with
the TVOC-2 Arc Guard System.
Examine the Arc Guard System and the package when
you unpack your new product. If there are damages,
please contact the transportation company or the ABB
reseller/office immediately.

Safety notes

In this user manual, these symbols are used:
WARNING
General warning symbol indicates the presence
of a hazard which could result in personal injury
and damage to equipment or property.
WARNING
Warning symbol indicates the presence of
hazardous voltage which could result in personal
injury.
INFORMATION
Information sign alerts the reader to relevant
facts and conditions.
Modifications to data in this manual can be applied without
notice.

General safety information

WARNING
Only authorized and appropriately trained
personnel are allowed to install and make the
electrical connection of the Arc Guard System in
accordance with existing laws and regulations.
WARNING
Examine the Arc Guard System and the package
when you unpack your new product. If there are
damages, please contact the transportation
company or the ABB reseller/office immediately.
WARNING
Only authorized and appropriately trained
service personnel are allowed to do service
and repair on the Arc Guard System. Note:
unauthorized repair will effect the warranty.
Personal
Service and repair should be performed
by authorized personnel only. Note that
unauthorized repair affects safety and warranty.

Advertisement

Table of Contents
loading

Table of Contents