Table of Contents
Advertisement
Installation, Operations and Maintenance Manual
1. Important Safety Notes & Warnings
1.1
Safe Practices
It is mandatory that the instructions provided within this
booklet be consulted to ensure safe interaction between
the device and personnel and/or the facility and its
equipment. The user has the responsibility of establishing
a safety program that addresses the proper interaction
with the equipment. This booklet is not intended to replace
a safety program.
Only qualified persons, as defined in the National Electric
Safety Code, who are familiar with the installation and
maintenance of medium voltage circuits and equipment
should be permitted to work with these Ground & Test
Devices.
1.2
Safety Notations
Safety notations alert personnel to possible death, injury
or property damage situations.
appear before the step in which the condition applies. The
one safety notice and three hazard levels notations are:
DANGER
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not
avoided, could result in death or serious injury
Courtesy of NationalSwitchgear.com
The safety notations
1VAL064601-MB Rev C
NOTICE
Indicates information considered important, but
not hazard-related (e.g., messages relating to
property damage).
CAUTION
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
Personnel installing, operating, or maintaining this
equipment must have thorough knowledge of all
applicable local, regional, industry, government, and
OSHA safety procedures as well as commonly accepted
safe working practices. Personnel working in or around
this equipment must also exhibit common sense and good
judgment regarding the potential hazards for themselves
and other personnel in the area. These instructions are
intended for use by fully qualified personnel and are not a
substitute
for
adequate
supervision.
Should clarification or additional information be required,
refer the matter to your nearest ABB Sales office. When
communicating with ABB regarding the product covered
by this IOM Manual, always reference the ABB assigned
Order number.
training,
experience
and
1
Advertisement
Table of Contents
