Philips SBC HD 1502 Instructions For Use Manual page 36

XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 36
36 ENGLISH
3 Select the input source you wish to listen to (analogue or digital):
– In case of analogue input source: you can select Dolby Prologic II;
– In case of digital input source: Dolby Digital or DTS will be activated
4 In case you activate Dolby Headphone you can toggle between the
3 modes and bypass mode.
5 The green "transmit" LED of the transmitter lights up if receiving an audio
signal.
– Pressing the 'transmit' button can disable the transmitter function.
6 In case you want to listen to the wireless headphone:
– Switch on the wireless headphone.
– It will tune automatically to the most recently used transmission channel.
– In case the headphone does not tune properly to the transmitter, then
– Adjust the volume to the desired level with the headphone volume
– Adjust treble and bass as desired by pressing the dedicated buttons on
7 In case you want to listen to a corded headphone:
– You can connect up to 2 corded headphones to the base station.
– Adjust the volume on the base station: this will have no effect on the
– Adjust the bass as desired by pressing the DBE button on the base
activation of Dolby Headphone is optional.
automatically, together with Dolby Headphone.
press the tuning button.
control.
the headphone's control panel.
wireless headphone.
station: this will have no effect on the wireless headphone.