Philips SBC HD 1502 Instructions For Use Manual page 20

XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 20
20 ENGLISH
• Battery usage caution - to prevent battery leakage which may
Headphone battery pack replacement
IMPORTANT!
• Use only the original rechargeable battery pack (SBC EH2412/00)
• Do not use other NiMH batteries, NiCd batteries or alkaline
1 Make sure that the power button of the headphone is in position 'off'.
2 Open the headphone's battery compartment door (figure 4 - 19a).
3 Take out the battery pack and dispose of them properly.
4 Insert the new battery pack in the headphone's battery compartment.
Use only the original rechargeable battery pack (SBC EH2412/00) which
comes equipped with 2 pieces of Philips R06/AA NiMH batteries
(1200 mAh).
5 Make sure the batteries are correctly inserted as indicated by the
engraved symbols in the battery compartment.
6 Close the headphone's battery compartment door.
IMPORTANT!
• Before using the FM headphone for the first time, please ensure
• The battery pack in the base station's recharging compartment
result in bodily injury, property damage or damage to the unit:
Install ALL batteries correctly, + and - as marked on the unit.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE
etc.). Remove batteries when the unit is not used for a long time.
that came with the HD1500 set and which contains 2 pieces of
Philips R06/AA NiMH batteries (1200 mAh).
batteries as these may damage your FM wireless system.
that the batteries are fully charged.This will guarantee a longer
operating lifetime of the batteries.
will be fully charged once the charging indicator LED in base
station's window is illuminated in green.