Table of Contents
Advertisement
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
firewall software programs may block a DHCP request on newly installed adapters.
firewall software programs may block a DHCP request on newly installed adapters.
3.2 Starting Setup in the
It is easy to configure and manage the
t is easy to configure and manage the WBS-502AC with the web browser.
Step 1.
To access the configuration page, open a web browser and enter
To access the configuration
http://192.168.1.253
in the web
After a moment, a login window will appear
After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case
letters. Then click the OK button or press the
button or press the Enter key.
Figure 3-4 Failed result of Ping command
Figure
the Web UI
web address field of the browser.
Figure 3-5 Login by default IP address
Figure
for the User Name and Password, both in lower case
Figure 3-6 Login Window
-21-
User Manual of
Manual of WBS-502AC
the default IP address
Advertisement
Table of Contents
