Canon iX6500 Series Service Manual page 15

system unit (2) Main case unit
(3) Print unit
(4) See
Procedures.
- See 2-2. Disassembly & Reassembly Procedures,
(8) Purge drive system unit (right plate) and
switch system unit (left plate)
Paper feed
details.
motor
- See 2-2. Disassembly & Reassembly Procedures,
(9) Engine unit
Caution:
- The screws securing the paper feed motor are
allowed to be loosened only for paper feed motor
replacement. (DO NOT loosen them in any other
cases.)
Platen unit (1) Front panel cover L
(2) Main case unit
(3) Print unit
(4) See
Procedures, from this step.
Spur unit (1) Front panel cover L
(2) Main case unit
(3) Print unit
(4) See
Procedures.
Caution:
- DO NOT contact the spur edges.
Purge drive (1) Front panel cover L
system unit (2) Main case unit
(3) Print unit
(4) See
Procedures.
- See 2-2. Disassembly & Reassembly Procedures,
(8) Purge drive system unit (right plate) and
switch system unit (left plate)
details.
- See 2-2. Disassembly & Reassembly Procedures,
(9) Engine unit
Carriage rail See 2-2. Disassembly & Reassembly
and carriage Parts Catalog.
2-2. Disassembly & Reassembly
reassembly, for details.
2-2. Disassembly & Reassembly
2-2. Disassembly & Reassembly
2-2. Disassembly & Reassembly
reassembly, for details.
[See
In the service mode:
2. Print the integrated inspection pattern.
removal, for
In the service mode:
1. Perform LF / Eject correction (only
2. Print the integrated inspection pattern.
In the service mode:
1. Print the integrated inspection pattern.
2. Perform LF / Eject correction (only
In the service mode:
1. Print the integrated inspection pattern.
removal, for
Procedures, and 1. Apply grease to the sliding portions.
11 / 52
3-5. Special Notes on Servicing,
(2) Paper feed motor adjustment, for
details.]
when uneven printing or streaks
appear on printouts after
replacement).
[See 3-3. Adjustment and Settings in
Service Mode, for details.]
when uneven printing or streaks
appear on printouts after
replacement).
[See 3-3. Adjustment and Settings in
Service Mode, for details.]
[See 3-4. Grease Application, for