Introduction; Warnings - KAEL Muhendislik Elektronik VARkombi-12-PC-TFT-OG Manual

Connection type selective, 12 step, reactive power control relay, industrial facilities, markets, oil stations, schools, workshops, hotels

Table of Contents

Introduction

All the information you need to know and the warnings regarding 3 Phase controlled VARkombi-

12-PC-TFT-OG reactive power control relay are described in the user manual.

Prior to taking the circuit for the device read this booklet carefully for your system and your own

safety. Do not act without getting touch with our company for the issues that can not be

understood.

Tel: 0090.232.877 14 84 (pbx) Fax: 0090.232.877 14 49

Factory: Atatürk mah. 78 sok. No:10 Ulucak köyü, Kemalpaşa - İZMİR

1- The device should be commisioned and programmed by the authorized and certificated

personels. If necessary, checks should be made by that person again.

2- As compensation is a complex system, subscriber' s system are advised to keep under

control by licensed - professional electrical engineers and technicians that company owned or

agreed.

3- Do not open the device and not let it open. There are not any parts in the device that the

user or someone can cut in.

4- Prior to making electrical connections to the terminals of the device, make sure that there is

no energy in the cable and terminals. There shouldn' t be energy at the control panel.

5- Do not use the device for different purposes other than compensation system.

6- Fix the device tightly on the control panel with the apparatus given on the device without

hanging around.

7- Do not interfere to the keys on the front panel with an object other than your fingers.

8- Wipe your device with dry cloth being sure to disconnect the power. Water or chemicals used

for cleaning damage to the device.

9- Make sure that the terminal connections are made in accordance with the connection

scheme and without causing contact problem (loose binding or multiple copper cables touching

to each other, etc.), prior to commissioning (supplying energy) of your device.

10- Use compensation contactors compatible to the power of the capacitor in your compensation

system. Select the fuses in the power line of the capacitor compatible to the current of the

capacitor.

11- Select the current value of the fuses connected to the C1, C2 and C3 terminals which are

input of contact phase considering the sum of the current drawn by the coils of connectors in

each group (senary). In case of using connectors with high current coil, auxiliary relay must be

used to prevent damage to the contact outputs of the device.

12- The alerts and the warnings above are just for your security. In case of not applied, KAEL

Elektronik Ltd. or its seller is not responsible for undesirable conditions.

Table of Contents