Enter Step Powers; Delete Step Powers - KAEL Muhendislik Elektronik VARkombi-12-PC-TFT-OG Manual

Connection type selective, 12 step, reactive power control relay, industrial facilities, markets, oil stations, schools, workshops, hotels

Hide thumbs

Table Of Contents

Table of Contents

1 7

10 5

Settings –

Advanced Setting Menu –

This is the section in which the step powers are entered. The

device directs the user with subcommand display

continuously. It is moved on the step of which the power is

required to be entered by using the up and down keys. In the

meantime, that line are in red colour. Select key is pressed.

The selected step number comes to screen. The selection of

triple-phase or single-phase of capacitor or reactor should be

made on this screen.

The position of red frame changes when up and down keys

are used. In case the reactive load on the step is triple-phase,

the frame is moved on triple-phase and "Select" key is

pressed. Triple-phase option becomes red in this case. If up or

down direction key is pressed, the red frame moves to total

value digit. The "Select" key is pressed and a blue underline

appears on the last digit inside of the frame. The value is

setup by using the up and down keys starting from the digit

where the blue line is. Then, left key is pressed and the blue

underline moves next to the left digit. All the values are

entered in the same way by using up and down keys. The

"Apply" key is pressed to take them into memory. The sub-

command screen changes and "Okay", then "Exit" key is

pressed. "Save Changes" will appear on the screen. When

"Okay" key is pressed, the value is taken into memory.

If the reactive load on the step is single-phase, frame is

moved onto single-phase and "Select" key is pressed. Single-

phase option becomes red in this case. In case of pressing up

or down direction key is pressed, the red frame moves on the

lines of R, S and T-phases including total value. In case of

which phase the reactive load on the step is connected to,

"Select" key is pressed during on that line. Entering the value

and taking it into memory is the same as described above.

P.S.: Moving the blue underline to the digit on which the sign is

by using the left key, the sign can be changed by pressing

upwards key. (+) represents the reactor, (-) represents the

capacitor.

1 7

10 5

Settings –

Advanced Setting Menu

This is the section in which the step parameters are deleted

one by one, or all. In case the reactive load is changed in any

step, the power of that step must be deleted to let the device

internalize the the power of new step. The device fowards the

user continuously by sub-command screen. Moving onto the

step of which power required to be deleted, the up or down

key is pressed. The line is in red colour in the meantime. In

case of deleting only that step, "Delete" key is pressed; in case

of deleting all steps (if a device used in somewhere

else is connected to a new plant),

"Delete All" key is pressed.

If "Delete" key is pressed, "Step Delete?"

warning appears on the screen. When

"Okay" key is pressed, the power of

that step would be deleted. The device

will automatically try to internalize the

power of that step again. You can exit

the menu by "Exit" key. In case "Delete

All?" key is pressed, "Steps Delete?"

warning appears on the screen. When

"Okay" key is pressed, the power of all

steps would be deleted. The device

will automatically try to internalize the

power of that step again. You can exit

the menu by "Exit" key.

Step Parameters –