Table of Contents
Advertisement
1 7 10 6 2
4
Alarm Setting Values
This is the section in which total harmonic distortion value (THDV) are entered for voltage. You
may enter a value between 1% and 100%. The value is setup to the required value by using the
up and down key starting from the digit where the blue line is. Then left key is pressed and the
blue underline moves next to the left digit. All values are entered in the same way by using up and
downkeys. "Select" key is pressed to take them into the memory.
"Save changes?" message will appear on the screen. Pressing "Okay" key, the value is taken into
the memory.
In case harmonic protection is
activated in the step protection
function (Chapter 1710643),
all steps are de-activated one
by one to protect the
capacitors when THDV setup
value is exceeded.
1 7 10 6 2
5
Alarm Setting Values
This is the section in which harmonic distortion value (HDV) are entered for voltage. You may
enter a value between 1% and 100%. The value is setup to the required value by using the up
and down key starting from the digit where the blue line is. Then left key is pressed and the blue
underline moves next to the left digit. All values are entered in the same way by using up and
downkeys. "Select" key is pressed to take them into the memory.
"Save changes?" message will appear on the screen. Pressing "Okay" key, the value is taken into
the memory.
In case harmonic protection is
activated in the step protection
function (Chapter 1710643), all
steps are de-activated one by one
to protect the capacitors when
HDV setup value is exceeded.
1 7 10 6 2
6
Alarm Setting Values
This is the section in which total harmonic distortion value (THDI) are entered for current. You
may enter a value between 1% and 100%. The value is setup to the required value by using the
up and down key starting from the digit where the blue line is. Then left key is pressed and the
blue underline moves next to the left digit. All values are entered in the same way by using up and
downkeys. "Select" key is pressed to take them into the memory.
"Save changes?" message will appear on the screen. Pressing "Okay" key, the value is taken into
the memory.
1 7 10 6 2
7
Alarm Setting Values
This is the section in which harmonic distortion value (HDI) are entered for current. You may enter
a value between 1% and 100%. The value is setup to the required value by using the up and down
key starting from the digit where the blue line is. Then left key is pressed and the blue underline
moves next to the left digit. All values are entered in the same way by using up and downkeys.
"Select" key is pressed to take them into the memory.
"Save changes?" message will appear on the screen. Pressing "Okay" key, the value is taken into
the memory.
– THD Voltage Setting (% 1 – 100)
1
2 3
4
5 6
7
8 9
10
11 12
Voltage THD Alarm Setting
THDV
008
%
▲ +
▼ -
◄
Apply
– HD Voltage Setting (% 1 – 100)
1
2 3
4
5 6
7
8 9
10
11 12
Voltage HD Alarm Setting
HDV
006
%
▲ +
▼ -
◄
Apply
– THD Current Setting (% 1 – 100)
1
2 3
4
5 6
7
8 9
10
11 12
Current THD Alarm Setting
THDI
020
%
▲ +
▼ -
◄
Apply
– HD Current Setting (% 1 – 100)
1
2 3
4
5 6
7
8 9
10
11 12
Current HD Alarm Setting
HDI
015
%
▲ +
▼ -
◄
Apply
1
2 3
4
5 6
7
8 9
10
11 12
30
Voltage THD Alarm Setting
Save
007
Changes ?
%
Okay
Exit
1
2 3
4
5 6
7
8 9
10
11 12
30
Voltage HD Alarm Setting
Save
005
Changes ?
%
Okay
Exit
1
2 3
4
5 6
7
8 9
10
11 12
30
Current THD Alarm Setting
Save
020
Changes ?
%
Okay
Exit
1
2 3
4
5 6
7
8 9
10
11 12
30
Current HD Alarm Setting
Save
015
Changes
%
Okay
Exit
30
THDV
Cancel
30
HDV
Cancel
30
THDI
Cancel
30
HDI
Cancel
22
Advertisement
Table of Contents
